Leave your name and phone number below for a free call-back to resolve your Edinburgh glazing problems. Someone will get back to you within 10 minutes
Want to speak to an expert?
Call: 0800 051 8637
Cat & Dog Flaps
Given a sufficiently large pane of glass, we can manufacture and install a pane of glass, with a hole pre-cut for the flap. We cannot work on existing toughened glass (due to the high tension in the glass), any pressure applied to the glass would cause the destruction of the glass. It is possible to cut normal glass in situ, but as this is at the owner's own risk, it is not recommended. There must be a minimum clearance of 150mm between the edge of the glass, and the edge of the hole of the flap, so the glass is able to go through the toughening process and remain intact.